Arduino MKR GPS Shield

Code: 7630049201248
Arduino MKR GPS Shield
$33.35
tax not included

Want to learn more?

Getting Started
< 20 mA 3.3V Standard (~20) Regular

The low power Global Navigation Satellite System receiver shield for your georeferenced projects.

  • Overview
  • Tech Specs
  • Documentation
  • If you are experimenting with monitoring fleets, high-altitude scientific experiments, or any kind of project requiring localization of devices, the MKR GPS Shield will offer you the functionality you need, and it is plug 'n' play!

    The MKR GPS Shield is based on the u-blox SAM-M8Q GNSS (Global Navigation Satellite System) module. It is meant to be used on top of boards in the MKR format, but thanks to its Eslov connector, it is also possible to hook it up to any board having that kind of connector available using a cable.

    This module is designed to operate with different positioning services concurrently. It receives and processes the signals from GPS, GLONASS, and Galileo. It interfaces with Arduino boards either through a serial interface, when used with headers and put on top of a MKR board, or through an I2C interface and a dedicated ESLOV cable supplied as bundle.

    Configuration Commands and Backup

    The GPS module can be configured via special commands. We have included an on-board battery holder for the system to keep the configurations made via software. This can be convenient when e.g. changing the operation mode of the GPS to 1g, something common in high altitude experiments, where specific settings away from the default ones are needed for the device.

    Another example is the use of Galileo's localization option, which is disabled by default, but can be enabled by sending a configuration message (UBXCFG-GNSS) to the receiver. You can find a detailed description of all of the commands in the protocol here.

    Getting Started

    Our Arduino_MKRGPS library handles the two different interfaces and offer a consistent set of APIs designed for a full usage of the GPS acquired information

    Need Help?

    Check the Arduino Forum for questions about the Arduino Language, or how to make your own Projects with Arduino. Need any help with your board please get in touch with the official Arduino User Support as explained in our Contact Us page.

    Warranty

    You can find here your board warranty information.

  • GNSS receiver u-blox module SAM-M8Q (datasheet)
    Connectors MKR headers / Eslov
    Input Voltage 3.3V
    Operating Voltage 3.3V
    Backup battery CR1216
    Communication Serial / I2C / DCC
    Length 45 mm
    Width 25 mm
    Weight 14 gr.
  • OSH: Schematics

    The Arduino MKR GPS Shield is open-source hardware! You can build your own board using the following files:

    EAGLE FILES IN .ZIP SCHEMATICS IN .PDF

    Additional I2C Port

    The MKR GPS Shield has an additional connector meant as an extension of the I2C bus. It's a small form factor 5-pin connector with 1.0 mm pitch. The mechanical details of the connector can be found in the connector's datasheet.

    The I2C port, also referred to as the Eslov self-identification port within Arduino, comes with: SDA, SCL, GND, +5V, and an extra digital pin meant to send an alarm to the otherwise plain I2C devices connected to it. The pinout is shown in the following image:

    If you are interested in designing your own modules for Arduino boards with this expansion port, the connector we suggest using is code: SHR-05V-S-B, also in the picture.