Arduino Nano Every with headers

Code: 7630049201552
Arduino Nano Every with headers
$11.90
tax not included

Want to learn more?

Getting Started

Turn your ideas into a reality quickly with the new Arduino Nano Every.

  • Overview
  • Tech Specs
  • Documentation
  • This small, robust and powerful board has the same classic Nano footprint loved worldwide.

    It can be programmed with the easy to use Arduino IDE available offline and online. Get started in minutes with thousands of sketches available in open-source or write your own: it is the perfect choice for your everyday projects.

    Based on the ATMega4809 AVR processor, the Arduino Nano Every is flexible to the requirements of your design. It can be used in a breadboard when mounting pin headers, or as a SMT directly soldered on a PCB thanks to its castellated pads. An SAMD11 ARM Cortex M0+ processor acts as a high performance USB to serial converter that can be re-programmed by skilled users to expand further the applications of this board.

    With headers mounted.

    Getting Started

    In the Getting Started section, you can find all the information you need to configure your board, use the Arduino Software (IDE), and start to tinker with coding and electronics.

    Do you want to learn more? Don’t miss the interview with Dario Pennisi, Arduino hardware and firmware development manager, who led the development of this board.

  • This board is based on the ATMega4809 microcontroller.

    Clock 20MHz
    Flash 48KB
    SRAM 6KB
    EEPROM 256byte

    A ATSAMD11D14A Processor takes care of the USB to SERIAL communication and it is connected to the following pins of the ATMega4809 microcontroller.

    ATMega4809 Pin ATMega4809 Acronym SAMD11 Pin SAMD11 Acronym Description
    9 PB05 15 PA22 SAMD11 TX -> ATMega4809 RX
    8 PB04 16 PA23 ATMega4809 TX -> SAMD11 RX
    41 UPDI

    12

    11

    PA15

    PA14

    UPDI RX

    UPDI TX

    The board has a two 15 pins connectors - one on each side -,  pin to pin compatible with the original Arduino Nano.

    Pin Funcion Type Description
    1 D13 Digital SPI SCK, GPIO
    2 +3V3 Power Out Internally generated power output to external devices
    3 AREF Analog Analog Reference; can be used as GPIO
    4 A0 Analog ADC in; can be used as GPIO
    5 A1 Analog ADC in; can be used as GPIO
    6 A2 Analog ADC in; can be used as GPIO
    7 A3 Analog ADC in; can be used as GPIO
    8 A4/SDA Analog ADC in; I2C SDA; Can be used as GPIO
    9 A5/SCL Analog ADC in; I2C SCL; Can be used as GPIO
    10 A6 Analog ADC in; can be used as GPIO
    11 A7 Analog ADC in; can be used as GPIO
    12 +5V Power Out Internally generated power output to external devices
    13 RST Digital In Active low reset input (duplicate of pin 18)
    14 GND Power Power Ground
    15 VIN Power In Vin Power input
    16 TX Digital USART TX; can be used as GPIO
    17 RX Digital USART RX; can be used as GPIO
    18 RST Digital Active low reset input (duplicate of pin 13)
    19 GND Power Power Ground
    20 D2 Digital GPIO
    21 D3/PWM Digital GPIO; can be used as PWM
    22 D4 Digital GPIO
    23 D5/PWM Digital GPIO; can be used as PWM
    24 D6/PWM Digital GPIO; can be used as PWM
    25 D7 Digital GPIO
    26 D8 Digital GPIO
    27 D9/PWM Digital GPIO; can be used as PWM
    28 D10/PWM Digital GPIO; can be used as PWM
    29 D11/MOSI Digital SPI MOSI; can be used as GPIO
    30 D12/MISO Digital SPI MISO; can be used as GPIO

  • OSH: Schematics

    The Arduino Nano Every is open-source hardware! You can build your own board using the following files:

    EAGLE FILES IN .ZIP SCHEMATICS IN .PDF