Skip to content
Please make sure to check the shipping deadlines* to ensure your gifts arrive on time!
Please make sure to check the shipping deadlines* to ensure your gifts arrive on time!

    Your cart is empty

    Time to spark some excitement 🛒⚡

Taxes and shipping calculated at checkout
Subtotal €0,00
Robotics

Robotics

Where ideas take motion.

Robotics

Where ideas take motion.

Robotics

  • Mini breadboard - White

    This is a small breadboard (4,6x3,6 cm) with 170 tie points. It is self-adhesive and compatible with the Arduino Proto Shield.

  • DYNAMIXEL XL-320

    XL-320 has a high performance and precise control feature compared to its compact size. It supports TTL communication with a daisy chain feature to help easily build small robots. XL-320 has a high...

  • DYNAMIXEL Shield for Arduino MKR Series

    DYNAMIXEL Shield for Arduino MKR allows users to easily use ROBOTIS’ DYNAMIXEL Series along with Arduino MKR Boards. The features are as follows: Compatible with Arduino MKR Compatible with RO...

  • Solar Power Manager For 12V Lead-Acid Battery

    The DFRobot Solar Power Manager series are designed for IoT projects and renewable energy projects, providing safe and high-efficiency embedded solar power management modules for makers and applica...

  • Stereo Enclosed Speaker - 3W 8Ω

    Stereo Enclosed Speaker is a new passive speaker with JST PH2.0 interface. It is a perfect option for any DIY audio project which requires an 8 ohm impedance and 3W power. The suitable size and scr...

  • USB-C Hub 3.2 with 4 USB-A ports

    The USB-C Hub with 4 USB-A ports 3.2 Gen1 (USB 3.0) Hub connects all your computer peripherals, USB sticks and external hard drives with a USB-A port to your laptop with USB-C. The USB-C Hub 3.2 w...

  • USB-C to HDMI multiport adapter with ethernet and USB hub

    The AC7042 USB-C 3.2 Gen1 4K Multiport Dock turns a notebook into a complete work station by connecting only one flexible USB-C cable. This multiport dock extends the notebook with a 4K monitor vi...

  • USB-C to HDMI multiport adapter 4K, USB hub, PD pass through

    Use the USB-C 3.2 Gen1 to HDMI 4K adapter to connect a HDMI screen or beamer to a notebook. The adapter supports a maximum resolution of 4096 x 2160 (4K) @ 30Hz. The AC7022 has a Power Delivery Pas...

  • Speed control for DC motors from 3 to 35V 5A

    Also ideal for adjusting the brightness of LED lights and strips.

  • L298 driver for DC/Stepper motors

    Based on the ST L298N chip, this module is designed to accept standard TTL logic levels and drive inductive loads such as relays, solenoids, DC motors, and stepper motors. It has the ability to re...

  • DC/DC converter with adjustable 1.5-35V output

    Step-Down DC/DC switching converter, with particularly small dimensions (48.35 x 23.35 x 14 mm), capable of converting a DC voltage between 3 and 40 volts into an output voltage from 1.5 to 35 volt...

  • Mini solar cell 2V 200mA

    A small polycrystalline photovoltaic cell, ideal for conducting experiments with solar energy or LED applications.

  • Mini encapsulated solar cell 2V 0,6W

    A photovoltaic solar panel with extremely small dimensions, ideal for conducting experiments with solar energy.

  • Arducam 0.3MP OV7675 20-pin DVP Camera Module for Arduino GIGA R1 WiFi

    The Arducam OV7675 camera provides support for resolutions of up to 640x480 pixels, ensuring the capture of clear and sharp images. Its versatile range of features enhances the functionality of you...

  • HM01B0 QVGA Monochrome DVP Camera Module for Arduino GIGA R1 WiFi Board

    This camera is based on HM01B0 QVGA monochrome rolling shutter image sensor. The sensor is an Ultra Low Power Image Sensor designed for Always-on vision devices and applications. With high light se...

  • HM0360 VGA Monochrome DVP Camera Module for Arduino GIGA R1 WiFi Board

    The camera module is based on HM0360 VGA image sensor, which is an ultralow power, Back Side Illuminated (BSI) CMOS sensor designed for energy efficient smart vision applications, such as object-sp...

  • Gesture Breakout with APDS-9960

    With this RGB and Gesture sensor, you will be able to control a computer, microcontroller, robot, and much more with a simple hand gesture! The usage pins are as follows: VL (optional IR LED power...

  • 5.5 V 1 watt solar panel

    Output voltage: 5.5 V, maximum current: 170 mA, connection: red-black cable with JST connector.

  • DC/DC Step-Down converter with 1.2-30 V 5A output

    DC/DC Step-Down converter that allows to convert a continuous voltage input between 5 and 32 volts into an output voltage from 1.2 to 30 volts (adjustable via trimmer). The maximum available curre...

  • Box of 100 pcs M.O. 10 VAL. trimmer resistors from 500 to 1 Mohm

    Plastic package containing 10 pieces of the following horizontal mount trimmer values: 500 ohm (501) 1 kohm (102) 2 kohm (202) 5 kohm (502) 10 kohm (103) 20 kohm (203) 50 kohm (503) 100 k...

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare