Overview
Need a free hand to hold onto all those techy bits and pieces? Then the Braccio Bundle is perfect for you! With the Arduino Uno-controlled Braccio robotic arm, you can unlock the unlimited possibilities of robotics or simply use it to take the perfect selfie.
- 1 x TinkerKit Braccio Robot - Designed for versatility, the Braccio can be assembled in a multitude of ways to enable it to support various objects on the end of the arm. With the ability to hold items weighing up to 400g and a gripper width of 90mm, the Braccio robotic arm can grasp whatever you need either perfectly still or whilst rotating 180 degrees. Includes a Braccio shield to allow you to hook up the servos directly to your Arduino board.
- 1 x Arduino UNO - The Arduino Uno is the ideal board for getting started with electronics and coding. The most used and documented board in the world, you'll find lots of ideas in the Arduino Project Hub to see how you can 'Get to Grips' with your new Braccio robotic arm.
Resources for Safety and Products
Manufacturer Information
The production information includes the address and related details of the product manufacturer.
Arduino S.r.l.
Via Andrea Appiani, 25
Monza, MB, IT, 20900
https://www.arduino.cc/
Responsible Person in the EU
An EU-based economic operator who ensures the product's compliance with the required regulations.
Arduino S.r.l.
Via Andrea Appiani, 25
Monza, MB, IT, 20900
Phone: +39 0113157477
Email: support@arduino.cc
Documentation
Braccio Bundle is open-source hardware! You can build your own board using the following file:
CAD FILES IN .ZIP
Get Inspired
Control the air/fuel mixture for a better fuel economy of a engine with a Arduino Nano.
Home file servers can be very useful for people who work across multiple devices and want easy access to their documents. And there are a lot of DIY build guides out there. But most of them are full-fledged NAS (network-attached storage) devices and they tend to rely on single-board computers. Those take a long time to boot and consume quite a lot of power. This lightweight file server by Zombieschannel is different, because it runs entirely on an Arduino. An ESP32 is a microcontroller with built-in connectivity (Wi-Fi and Bluetooth). Like all MCUs, it can “boot” and start running its firmware almost instantly. And while it runs, it will consume much less power than a conventional PC or a single-board computer. Zombieschannel’s project proves that the Arduino Nano ESP32 is suitable for a file server — if your expectations are modest. The hardware for this project consists of a Nano ESP32, an SD card reader module, and a small monochrome OLED screen. The SD card provides file storage and the OLED shows status information. Most of the work went into writing the firmware, which Zombieschannel did with assistance from ChatGPT. That has the Arduino hosting a basic web interface that local users can access to upload or download files. Zombieschannel also created a command line interface that provides more comprehensive access via a serial connection. This does have limitations and the transfer speeds are quite slow by modern standards. But the file server seems useful for small files, like text documents. Zombieschannel plans to design an enclosure for the device and it should tuck unobtrusively into a corner, where it can run without drawing much power.
