Tinkerkit Braccio robot

Code: T050000
Tinkerkit Braccio robot
€199.00
prices are VAT excluded

Want to learn more?

Unlock the unlimited possibilities of robotics with BRACCIO!
  • Overview
  • Tech Specs
  • You can assemble your BRACCIO in a multitude of ways. Because it is designed for versatility, the BRACCIO can also support various objects on the end of the arm. The included BRACCIO shield allows you to hook up the servos directly to your Arduino board.
  • Power
    It is recommended to power the board via the jack connection with a regulated 5 VDC @ 5000 mA power supply provided in the box.

    There is an on-board voltage regulator for higher voltages that protect the Braccio shield. NOTE: The protection doesn’t work for the Arduino Yun if you put the bridge between Vin and 5V on the Arm Robot Shield V1 (greater version of are called Braccio shield and has a power switch on the top of the shield)
    Physical Characteristics
    • Plastic Parts x 21
    • Screws x 63
    • Flat Washer x 16
    • Hexagon Nut x 7
    • Springs x 2
    • Servo Motors: 2 x SR 311, 4 x SR 431
    • Arduino compatible Shield x 1 
    • Power Supply 5V, 5A x 1
    • Phillips Screwdriver x 1
    • Double Hexagon Box Wrench x 1
    • Spiral Cable Protection Wrap x 1

    Fully assembled Braccio Kit: 

    Weight

    792 g

    Maximum operating distance range

    80 cm

    Maximum Height 

    52 cm

    Base Width

    14 cm

    Gripper Width

    90 mm

    Cable length

    40 cm

    Load Capacity

    Maximum weight at 32 cm operating distance: 150 g

      Maximum weight at the minimal Braccio configuration: 400g

    Braccio Shield: The maximum length and width of the Braccio Shield PCB are 2.7 and 2.1 inches respectively, with the power jack extending beyond the former dimension. Four screw holes allow the board to be attached to a surface or case. Note that the distance between digital pins 7 and 8 is 160 mil (0.16"), not an even multiple of the 100 mil spacing of the other pins.
    Servo Technical Specification
    SpringRC SR431 - Dual Output Servo

    Control Signal

    PWM Analog

    Torque

    @ 4.8V: 169.5 oz-in (12.2 kg-cm)

    @ 6.0V: 201.4 oz-in (14.5 kg-cm)

    Weight

    2.19 oz (62.0 g)

    Dimentions

    1.65×0.81×1.56 in (42.0×20.5×39.5 mm)

    Speed

    @ 4.8V: 0.20 sec/60°

    @ 6.0V: 0.18 sec/60°

    Rotation Support

    Dual Bearings

    Gear Material

    Metal

    Rotation Range

    180°

    Connector Type

    J (aka Futaba)

    SpringRC SR311

    Control Signal

    PWM Analog

    Torque

    @ 4.8V: 43.13 oz-in (3.1 kg-cm)

    @ 6.0V: 52.86 oz-in (3.8 kg-cm)

    Weight

    0.95 oz (27.0 g)

    Dimentions

    1.23×0.65×1.13 in (31.3×16.5×28.6 mm)

    Speed

    @ 4.8V: 0.14 sec/60°

    @ 6.0V: 0.12 sec/60°

    Rotation Support

    Dual Bearings

    Gear Material

    Metal

    Rotation Range

    180°

    Connector Type

    J (aka Futaba)