Overview
Utilizing Arduino's unique 'Panini Concept' — where designers pick up a MKR board, then mix-and-match it with the desired shields and carrier boards to create custom hardware configurations for IoT projects as if they were crafting a sandwich! The IoTerrific bundle includes the Arduino MKR WiFi 1010, plus the MKR MEM Shield and MKR Connector Carrier, making it one of Arduino's most popular 'combos' and providing you with a terrific starting point for designing your next IoT solution. Availble for a limited time period with a special 'combo' price of $63,99.
- 1 x Arduino MKR WiFi 1010 - Featuring the flexibility of the ESP32 module from u-blox and its low power consumption, the MKR WiFi 1010 enables you to accelerate and simplify the prototyping of WiFi-based IoT applications. The MKR WiFi 1010 features the smae standardized, modular form factor as the rest of the MKR family, and is consists of three main blocks:
i) Microchip ATSAMD21 MCU based on an Arm Cortex-M0+ processor
ii) u-blox NINA-W10 series low power 2.4GHz IEEE 802.11 b/g/n Wi-Fi
iii) ECC508 CryptoAuthentication
The design includes a Li-Po charging circuit that allows the MKR WiFi 1010 to run on battery power or external 5V, charging the Li-Po battery while operating on external power - switching from one source to the other is done automatically.
- 1 x MKR MEM Shield - Short on memory? the MKR MEM Shield can help. It adds an additional 2MB flash memory and MicroSD storage to go with your MKR board.
- 1 x MKR Connector Carrier - Allows you to connect several Seeed Studio Grove modules to your Arduino board; enabling you to build real systems quickly and easily for your IoT prototype.
Features:
Interface with up to 14 Grove Connectors
Analog inputs six at 5V
Digitial input/output six at 5V
Other connectors one 5V I2C, one 5V UART
Arduino IoT Cloud Compatible
Resources for Safety and Products
Manufacturer Information
The production information includes the address and related details of the product manufacturer.
Arduino S.r.l.
Via Andrea Appiani, 25
Monza, MB, IT, 20900
https://www.arduino.cc/
Responsible Person in the EU
An EU-based economic operator who ensures the product's compliance with the required regulations.
Arduino S.r.l.
Via Andrea Appiani, 25
Monza, MB, IT, 20900
Phone: +39 0113157477
Email: support@arduino.cc
Get Inspired
Another Slot Car Lap Counter, but if I did it anyone can do!
If you need a device which draws a certain amount of current and power for testing, then GreatScott! has just the solution. His project uses an Arduino Nano, along with a separate IC and a voltage divider, to measure both current and voltage input from the power source. It then employs this data to properly adjust a MOSFET, dissipating the correct amount of voltage and power as required. Interface is handled via a rotary encoder and a 16x2 I2C LCD display, and the electronics are housed in a solid-looking enclosure. As seen in the video below, the adjustable constant load features an impressively large heat sink, needed to take care of the 30V and 20A that the setup is capable of drawing.