Futura Group

This module is equipped with 1 relay that allows you to activate/deactivate the load connected to it 240V/10A (max). The relay is activated by connecting the positive to 5 volts to the “S” pin.

The RCWL-0516 is particularly suitable as an alternative to using a PIR motion sensor. When it detects a moving object, the output changes from a low logic level to a high level (3.3 volts). Approp...

It can function as an RFID card reader/writer, NFC reader with Android smartphone and in wireless mode with two identical devices. It can be used with Arduino to create access control devices. The...

Based on the ESP8266 Wi-Fi transceiver module and the CH340 USB converter chip, this compact (Open Source) development and prototyping board is ideal for IoT applications. The Wi-Fi module is comp...

Particularly suitable for reducing the number of I/Os required when used with Arduino or other microcontroller, the I²C interface has jumpers to activate the backlight and contrast adjustment which...

Ideal for use with experimental boards! The wires are separable for ease of use.

Ideal for use with experimental boards!

It has only three terminals and operates on 5 V power supply. Vdd= + 5 Vdc, GND= ground, OUT= TTL signal output

Transparent plastic box with compartments and closing hinge containing 500 radial electrolytic capacitors divided into 24 values ranging from 0.1µF - 1000µF. Dielectric material: aluminum. Conten...

The package includes: 20 pcs - 6x6x4.3 mm 20 pcs - 6x6x5 mm 20 pcs - 6x6x6 mm 20 pcs - 6x6x7 mm 20 pcs - 6x6x8 mm 20 pcs - 6x6x9.5 mm 20 pcs - 6x6x11 mm 15 pcs - 6x6x12 mm 15 pcs - 6x6x1...

Contents of the package: 25 pieces - 0 Ohm 25 pieces - 10 Ohm 25 pieces - 20 Ohm 25 pieces - 47 Ohm 25 pieces - 470 Ohm 25 pieces - 2.2 KOhm 25 pieces - 4.7 KOhm 25 pieces - 22 KOhm 25 p...

This is a Bluetooth 4.0 (Low Energy) module compliant with ISM 2.4 GHz, with master/slave mode of operation and transparent data transmission, based on the Texas Instruments CC2541 chip with 256K F...

This is a 840-point experimental ABS board with a self-adhesive base. Dimensions (mm): 174x66,5x8,5 mm Weight: 100 grams.

This is a 830-point experimental ABS board with a self-adhesive base. Dimensions (mm): 165x55x10 Weight: 69 grams.

Dimensions: 82 x 55 mm.  White color.

Also ideal for adjusting the brightness of LED lights and strips.

Extremely flexible, even after folded it always returns to its original shape. Dimensions 337 x 227 mm.

Extremely flexible, even after folded it always returns to its original shape. Dimensions 450 x 300 mm. Make your soldering and repair work easy with this multifunctional mat. ESD-Safe Heat-res...

Output voltage: 5.5 V, maximum current: 170 mA, connection: red-black cable with JST connector.

It allows to provide the right degree of current to the batteries protecting them from an excess of discharge or charge in order to prolong their life cycle as much as possible. Attention! use onl...

A set consisting of 10 blue 5 mm LEDs, 10 green, 10 red, 10 yellow, 10 white, 10 common anode RGB and 10 common anode bicolour (red-green) LEDs.

The data channel for communication is a One-Wire serial type and can be controlled with microcontrollers like Arduino. You can set the refresh frequency as desired to make certain light effects im...

The data channel for communication is a One-Wire serial type and can be controlled with microcontrollers like Arduino.  You can set the refresh frequency as desired to make certain light effects i...

The data channel for communication is a One-Wire serial type and can be controlled with microcontrollers like Arduino. You can set the refresh frequency as desired to make certain light effects imp...