Overview
If you are experimenting with monitoring fleets, high-altitude scientific experiments, or any kind of project requiring localization of devices, the MKR GPS Shield will offer you the functionality you need, and it is plug 'n' play!
The MKR GPS Shield is based on the u-blox SAM-M8Q GNSS (Global Navigation Satellite System) module. It is meant to be used on top of boards in the MKR format, but thanks to its Eslov connector, it is also possible to hook it up to any board having that kind of connector available using a cable.
This module is designed to operate with different positioning services concurrently. It receives and processes the signals from GPS, GLONASS, and Galileo. It interfaces with Arduino boards either through a serial interface, when used with headers and put on top of a MKR board, or through an I2C interface and a dedicated ESLOV cable supplied as bundle.
Configuration Commands and Backup
The GPS module can be configured via special commands. We have included an on-board battery holder for the system to keep the configurations made via software. This can be convenient when e.g. changing the operation mode of the GPS to 1g, something common in high altitude experiments, where specific settings away from the default ones are needed for the device.
Another example is the use of Galileo's localization option, which is disabled by default, but can be enabled by sending a configuration message (UBXCFG-GNSS) to the receiver. You can find a detailed description of all of the commands in the protocol here.
Getting Started
Our Arduino_MKRGPS library handles the two different interfaces and offer a consistent set of APIs designed for a full usage of the GPS acquired information
Need Help?
Check the Arduino Forum for questions about the Arduino Language, or how to make your own Projects with Arduino. Need any help with your board please get in touch with the official Arduino User Support as explained in our Contact Us page.
Warranty
You can find here your board warranty information.
Tech specs
| GNSS receiver | u-blox module SAM-M8Q (datasheet) |
| Connectors | MKR headers / Eslov |
| Input Voltage | 3.3V |
| Operating Voltage | 3.3V |
| Backup battery | CR1216 |
| Communication | Serial / I2C / DCC |
| Length | 45 mm |
| Width | 25 mm |
| Weight | 14 gr. |
Conformities
Resources for Safety and Products
Manufacturer Information
The production information includes the address and related details of the product manufacturer.
Arduino S.r.l.
Via Andrea Appiani, 25
Monza, MB, IT, 20900
https://www.arduino.cc/
Responsible Person in the EU
An EU-based economic operator who ensures the product's compliance with the required regulations.
Arduino S.r.l.
Via Andrea Appiani, 25
Monza, MB, IT, 20900
Phone: +39 0113157477
Email: support@arduino.cc
Documentation
OSH: Schematics
The Arduino MKR GPS Shield is open-source hardware! You can build your own board using the following files:
EAGLE FILES IN .ZIP SCHEMATICS IN .PDF
Additional I2C Port
The MKR GPS Shield has an additional connector meant as an extension of the I2C bus. It's a small form factor 5-pin connector with 1.0 mm pitch. The mechanical details of the connector can be found in the connector's datasheet.
The I2C port, also referred to as the Eslov self-identification port within Arduino, comes with: SDA, SCL, GND, +5V, and an extra digital pin meant to send an alarm to the otherwise plain I2C devices connected to it. The pinout is shown in the following image:
If you are interested in designing your own modules for Arduino boards with this expansion port, the connector we suggest using is code: SHR-05V-S-B, also in the picture.
Learn more
Get Inspired
… storage save us? The smart storage solution Khairul decided to fix the problem by building his very own smart pantry, designed to keep track of ingredients and make sure nothing ever runs out. The project works by monitoring every item in the pantry, and if something is running low, it automatically orders a replacement using Amazon DRS. This project is a great way to remove human error from the process of keeping our cupboards stocked. The best part is it’s easy to do yourself at home with just a few simple components and tools. Check out the full project and instructions here. Smart wardrobe An overflowing wardrobe is a good thing — it allows you to mix up your outfits and dress well whatever the occasion. However, packed wardrobes can also be tricky to manage, and it’s easy to lose track of clothes or end up filling space with items we no longer wear. Arduino user Tan See Youu decided to fix this problem by building his own smart wardrobe. The challenge People today own more clothes than ever before. However, you probably won’t wear all of them. Over time, certain outfits tend to get forgotten and fall back into the murky depths of the wardrobe, never to see the light of day again. In areas with high humidity and warm climates like Singapore, clothes that are left for a long time in the wardrobe can even become moldy. The smart storage solution Tan See Youu’s smart wardrobe helps you manage your clothes and keep track of where everything is, displaying this information on a smart screen. The wardrobe can also push this data into the cloud and share it with your phone via a mobile application. The app can even provide suggestions on what to wear today based on the events in your calendar and the current weather forecast, and it comes with a dashboard showing which clothes you wear most frequently and which outfits you have neglected. If you haven’t worn a certain item in a while, the app can offer suggestions for