Skip to content

    Your cart is empty

    Time to spark some excitement 🛒⚡

Taxes and shipping calculated at checkout
Subtotal €0,00
Cloud Compatible

Arduino IoT Bundle

Sold out
SKU AKX00042 Barcode 7630049203914 Show more
Original price €0
Original price €89,25 - Original price €89,25
Original price
Current price €89,25
€89,25 - €89,25
Current price €89,25
VAT included

The Arduino IoT Bundle is the best way to start exploring the world of connected devices using the Arduino Nano RP2040 Connect. Follow the 5 step by step tutorials to quickly learn how to build IoT devices.

Overview

Follow the 5 step by step tutorials we have prepared for you and combining the electronic components included in the bundle,  you’ll quickly learn how to build devices that connect to the Arduino IoT Cloud.

The 5 step by step tutorials are:

Arduino IoT Cloud Compatible

Use your MKR board on Arduino's IoT Cloud, a simple and fast way to ensure secure communication for all of your connected Things.

TRY THE ARDUINO IOT CLOUD FOR FREE


Tech specs

Each bundle includes:

  • 1 Arduino Nano RP2040 Connect
  • 1 micro USB cable
  • 1 400-point breadboard
  • 70 solid-core jumper wires
  • 2 stranded jumper wire
  • 6 phototransistors
  • 3 potentiometers (10k ohm)
  • 10 pushbuttons
  • 1 temperature sensor (TMP36)
  • 1 tilt sensor
  • 1 alphanumeric LCD (16 x 2 characters)
  • 1 bright white
  • 28 LEDs (1 RGB, 8 red, 8 green, 8 yellow, 3 blue)
  • 1 small DC motor (6/9V)
  • 1 small servo motor
  • 1 piezo capsule (PKM17EPP-4001-B0)
  • 1 H-bridge motor driver (L293D)
  • 1 optocouplers (4N35)
  • 2 MOSFET transistors (IRF520)
  • 5 capacitors (100uF)
  • 5 diodes (1N4007)
  • 1 male pin strip (40 x 1)
  • 20 resistors (220 ohm)
  • 5 resistors (560 ohm)
  • 5 resistors (1k ohm)
  • 5 resistors (4.7k ohm) 
  • 20 resistors (10k ohm)
  • 5 resistors (1M ohm)
  • 5 resistors (10M ohm)

Resources for Safety and Products

Manufacturer Information

The production information includes the address and related details of the product manufacturer.

Arduino S.r.l.
Via Andrea Appiani, 25
Monza, MB, IT, 20900
https://www.arduino.cc/ 

Responsible Person in the EU

An EU-based economic operator who ensures the product's compliance with the required regulations.

Arduino S.r.l.
Via Andrea Appiani, 25
Monza, MB, IT, 20900
Phone: +39 0113157477
Email: support@arduino.cc

 

Get Inspired

BLOG
Controlling a power strip with a keyword spotting model and the Nicla Voice
Controlling a power strip with a keyword spotting model and the Nicla Voice
November 24, 2023

As Jallson Suryo discusses in his project, adding voice controls to our appliances typically involves an internet connection and a smart assistant device such as Amazon Alexa or Google Assistant. This means extra latency, security concerns, and increased expenses due to the additional hardware and bandwidth requirements. This is why he created a prototype based on an Arduino Nicla Voice that can provide power for up to four outlets using just a voice command. Suryo gathered a dataset by repeating the words “one," “two," “three," “four," “on," and “off” into his phone and then uploaded the recordings to an Edge Impulse project. From here, he split the files into individual words before rebalancing his dataset to ensure each label was equally represented. The classifier model was trained for keyword spotting and used Syntiant NDP120-optimal settings for voice to yield an accuracy of around 80%. Apart from the Nicla Voice, Suryo incorporated a Pro Micro board to handle switching the bank of relays on or off. When the Nicla Voice detects the relay number, such as “one” or “three," it then waits until the follow-up “on” or “off” keyword is detected. With both the number and state now known, it sends an I2C transmission to the accompanying Pro Micro which decodes the command and switches the correct relay. To see more about this voice-controlled power strip, be sure to check out Suryo’s Edge Impulse tutorial.

read more

FAQs

I plugged the board to my PC / MAC but I cannot see the serial port listed in the IDE, so I can't upload my sketch to the board!

  • Make sure the foam that protects the boards’ pins is removed.
  • Try connecting the board with another USB cable.
  • Try connecting the board to another USB port. If possible, avoid USB-hubs.

You can see more information and other things to try in this Help Center article.

Do I need to subscribe to the Arduino IoT Cloud to build the projects described in the tutorials?

No, all the projects can be built using the free plan of the Arduino IoT Cloud. Click here to see what is included in the plan.

How to enable the 5V / VUSB pin?

The 5V pin is disabled by default. You can locate on the bottom of the board on the VBUS pin two pads, shorting these will enable 5V output. More info on this here.

Where can I find the step by step tutorials?

You can find the step by step tutorials at arduino.cc/iot-bundle

Compare products

0 of 3 items selected

Select first item to compare

Select second item to compare

Select third item to compare

Compare