Skip to content

Arduino MKR Relay Proto Shield

Code: TSX00003   /   Barcode: 7630049200760
€13,90

Overview

The MKR Relay Protoshield allows you to easily add relays to your MKR board based project.

The shield provides two relays (Datasheet)  called RELAY1 and RELAY2 commanded by pin 1 and pin 2 respectively.

The shield also provides an easy connection by means of screw terminal blocks to A1 to A4 analog inputs, I2C and supply voltages.

  • Operating voltage 3.3V (supplied from the host board)
  • Two relays with NOCOM and NC connections
  • Works with battery powered board
  • 8 positions screw terminal blocks  for easy connections with A1 to A4 Analog input, SCL SDA for I2C, GND and 3.3V output
  • 6 positions screw terminal blocks (NO, COM, NC for each relay)
  • Carry current: 2 A
  • Max. operating voltage: 24 VAC, 50 VDC
  • Max. operating current: 1 A
  • Max. switching capacity: 62.50 VA, 30W
  • Proto area

You can find here your board warranty information.

Need Help?


Documentation

OSH: Schematics

MKR Relay Proto Shield is open-source hardware! You can build your own board using the following files:

EAGLE FILES IN .ZIP SCHEMATICS IN .PDF

Get Inspired

Arduino MKR Relay Proto Shield

Code: TSX00003   /   Barcode: 7630049200760
€13,90
The MKR Relay Proto Shield allows you to easily command relays with your MKR board. The shield provides two on board relays and a small prototyping area if you need to add some other component to your project.
€0,00
x