Arduino Starter Kit Classroom Pack - ITALIAN
The ideal solution for a class to get started with Arduino and learning programming and electronics, it contains fun and engaging interactive projects.
Italian Version.
Overview
The Arduino Starter Kit Classroom Pack is a bundled solution, containing six of the popular Arduino Starter Kits in italian.
This Classroom 6-Pack is for a classroom of at least twelve students — the recommended ratio is two students per kit — and intended for use starting from middle school teachers onwards, looking for an extensive educational solution for learning how to use the Arduino platform.
Each kit contains an Arduino Uno Rev 3 board, a collection of sensors and actuators, and — most important — a guide book which will help students and teachers to take their first steps into the world of electronics, with interactive and sensing objects.
Each Arduino Starter Kit contains a full color 170-page book with instructions for fifteen projects:
01. GET TO KNOW YOUR TOOLS: An introduction to the basics.
02. SPACESHIP INTERFACE: Design a control panel for a starship.
03. LOVE-O-METER: Measure how hot-blooded you are.
04. COLOR MIXING LAMP: Produce any color with a lamp that uses light as an input.
05. MOOD CUE: Let people know how you're doing.
06. LIGHT THEREMIN: Create a musical instrument you play by waving your hands.
07. KEYBOARD INSTRUMENT: Play music with this keyboard.
08. DIGITAL HOURGLASS: A light-up hourglass that can stop you from working too much.
09. MOTORIZED PINWHEEL: A colored wheel that will make your head spin.
10. ZOETROPE: Create a mechanical animation you can play--and in reverse.
11. CRYSTAL BALL: A mystical tour to answer all your tough questions.
12. KNOCK LOCK: Unlock a door with a secret knock.
13. TOUCHY-FEELY LAMP: A lamp that responds to your touch.
14. TWEAK THE ARDUINO LOGO: Control your personal computer from your Arduino.
15. HACKING BUTTONS: Create a master control for all of your devices!
Tech specs
Each Starter Kit includes:
1 Projects Book in italian (170 pages), 1 Arduino Uno, 1 USB cable, 1 Breadboard 400 points, 70Solid core jumper wires, 1 Easy-to-assemble wooden base, 1 9v battery snap, 1 Stranded jumper wires (black), 1 Stranded jumper wires (red), 6 Phototransistor, 3 Potentiometer 10kOhms, 10Pushbuttons, 1 Temperature sensor [TMP36], 1 Tilt sensor, 1 alphanumeric LCD (16x2 characters), 1LED (bright white), 1 LED (RGB), 8 LEDs (red), 8 LEDs (green), 8 LEDs (yellow), 3 LEDs (blue), 1 Small DC motor 6/9V, 1 Small servo motor, 1 Piezo capsule [PKM17EPP-4001-B0], 1 H-bridge motor driver [L293D], 1 Optocouplers [4N35], 2 Mosfet transistors [IRF520], 5 Capacitors 100uF, 5 Diodes [1N4007], 3 Transparent gels (red, green, blue), 1 Male pins strip (40x1), 20 Resistors 220 Ohms, 5Resistors 560 Ohms, 5 Resistors 1 kOhms, 5 Resistors 4.7 kOhms, 20 Resistors 10 kOhms, 5Resistors 1 MOhms, 5 Resistors 10 MOhms
Conformities
Resources for Safety and Products
Manufacturer Information
The production information includes the address and related details of the product manufacturer.
Arduino S.r.l.
Via Andrea Appiani, 25
Monza, MB, IT, 20900
https://www.arduino.cc/
Responsible Person in the EU
An EU-based economic operator who ensures the product's compliance with the required regulations.
Arduino S.r.l.
Via Andrea Appiani, 25
Monza, MB, IT, 20900
Phone: +39 0113157477
Email: support@arduino.cc
Get Inspired
Control the air/fuel mixture for a better fuel economy of a engine with a Arduino Nano.
When you want to paint the walls in your bedroom that very specific shade of Misty Irish Green, all you have to do is head to your local hardware store and have them scan the corresponding card. The paint-mixing machine will then add the pigment to a white base and, a few minutes later, you have that exact color. So, shouldn’t you be able to do the same thing with acrylic paint for hobby purposes? Now you can, thanks to the “Color By Code” machine designed by Caltech students Frida Moreno and Asmat Kaur Taunque. Moreno and Taunque built Color By Code for a class project and it is, essentially, a hobby version of those hardware store paint-mixers intended for acrylic paint. As is the standard across many industries that deal with pigments, paint, and printing, this works using CMYK (cyan, magenta, yellow, key) color mixing. Here, the key is black and the machine takes an input color value for each component, then dispenses the paint in those ratios to achieve the desired hue. That all happens under the control of an Arduino Nano Every board. That operates peristaltic pumps, via L298N motor drivers, that dispense each color. Afterwards, a flushing procedure clears the lines before the next mix. The pumps fit into a 3D-printed stand, with the hoses dropping below to a waiting container. At this time, the user must set the color values through serial commands. But the team hopes to create a Bluetooth app in the future. They also plan to add a weight sensor, which would improve the machine’s accuracy.