Skip to content
Accessories

Accessories

Make your project more useful, versatile and creative
  • €51,67

    Nano Motor Carrier is the perfect add-on for the Nano 33 IoT board as it works to extend and power up its functionality. Designed to facilitate motor control, Nano Motor Carrier takes care of the electronics required to control motors, allowing students to focus on prototyping and building their...

    View full details
    €51,67
  • €21,00

    Even though Arduino Education kits are jam-packed with everything you need, we know that mislaying parts in the excitement of getting hands-on in a classroom can sometimes happen. In the Arduino Replacements Pack, you’ll find all the common electronics parts two students may need to complete thei...

    View full details
    €21,00
  • €26,67

    Arduino Engineering Kit R2 contains all the components students need to complete each project, but we know that in the excitement of using the kit, the motors may sometimes burn, break or simply get lost. In the Engineering Kit - Motors Backup, you’ll find all the replacement motors students may...

    View full details
    €26,67
  • €5,00

    The Arduino Nano 33 BLE Sense Protective Silicone Case is designed to perfectly fit your Arduino Nano 33 BLE Sense, and to protect it in case of adventurous experiments. Take full advantage of the motion sensors on your board, protect it against impact with the silicon case, and launch different...

    View full details
    €5,00
  • €82,00

    Enhance your Robotis Mini capabilities with the Spare Parts. The ROBOTIS MINI Spare Parts Pack 1 includes components from the ROBOTIS MINI kit such as the battery, cables, rivets and tapping screws. Look at the full list here: 1 Li-ion battery 3.7V 1300mAh LB-041 1 Li-ion Battery Charger Set L...

    View full details
    €82,00
  • €7,99

    Don’t pay too much attention where to place your UNO-Type and size boards. The Holder Type Uno will help guard you boards from accidental damages. It fits every UNO sized boards, and you can choose among a number of nice colors.Use screws to attach the board and use the different colors to tell y...

    View full details
    €7,99
  • €1,00

    6/8/10pin Female/Male header strips Uno printed and 2x3 Female header, very useful for board extensions. We use them extensively on Proto Shield PCB, but they are useful in any shield because of their height.↵- Features:↵Receptacle Style: Square↵Number of Ways/Pins: 6/8/10↵Pin Spacing: 2.54 mm↵Co...

    View full details
    €1,00
  • €10,90

    The MKR2UNO Adapter allows you to turn your Arduino UNO form factor based project into a MKR based one without too much effort! You can so upgrade your project with a powerful board with integrated LiPo battery charger. Please note that currently the MKR2UNO adapter is compatible only with MKR100...

    View full details
    €10,90
  • €7,90

    Protective case designed specifically for the Arduino Mega, the perfect companion! This case is made for Arduino Mega's with the reset button in the center of the board. It will fit the new Arduino Mega's with the reset button in the corner, but you won't be able to push the button with the lid ...

    View full details
    €7,90
  • €7,90

    Protective case designed specifically for the Arduino Uno, the perfect companion!

    €7,90
  • €7,90

    Board Enclosure is what you need to protect your Arduino Board. Specifically designed for the Arduino Uno, Zero, Mega, Due; it accommodates the board and your shield perfectly and keep your standalone projects safe from short circuits and external hazards

    €7,90
  • €4,20

    The enclosure is designed to snap together securely with no tools required.  You can still press all the buttons and slide the switch thanks to a clever plastic widget fitted inside.  The case winds around all the touch pads so you can still touch them or attach alligator clips.

    €4,20
  • €1,00

    14 pin Female/Male header strips MKR1000 printed, very useful for board extensions. We use them extensively on Proto Shield PCB, but they are useful in any shield because of their height. Features: Receptacle Style: Square Number of Ways/Pins: 14 Pin Spacing: 2.54 mm Component Height: 20.7mm (Pl...

    View full details
    €1,00
  • €3,00

    Arduino SIM card offers easy, global cellular connectivity for your Arduino IoT Cloud projects. You can monitor your devices anytime, anywhere in the world thanks to the GSM / 3G network, which currently is the most extended one. Arduino SIM is ideal for connected devices on the go, or in areas w...

    View full details
    €3,00
  • €7,90

    The case is a two-piece injection-moulded ABS enclosure that snaps together around the Arduino YUN. Holds the Arduino YUN firmly in placeIt provides tough protection for the Arduino YUN while providing access to all Arduino Mega's connectors.Includes reset key for use with the board's reset butto...

    View full details
    €7,90
  • €4,50

    Atmel ATmega328 microcontoller in a DIL-28 package , pre-loaded with the Arduino UNO 16MHz bootloader. Using this device enables the use of Arduino code in a custom embedded project without having to use an actual Arduino board. 

    €4,50
  • €1,00

    14 pin Female Headers MKR1000 printed, we use them extensively on Large MKR Proto Shield PCB. Features: Receptacle Style: Square Number of Ways/Pins: 14 Pin Spacing: 2.54 mm Component Height: Plastic body 8.5mm

    €1,00
  • €1,70

    Pair of 8 pin Female/Male header strips, very useful for board extensions. We use them extensively on Proto Shield PCB, but they are useful in any shield because of their height. Features: - Receptacle Style: Square - Number of Ways/Pins: 8 - Pin Spacing: 2.54 mm - Component Height: 23.5mm (Pla...

    View full details
    €1,70
  • €1,75

    Pair of 10 pin Female/Male header strips, very useful for board extensions. We use them extensively on Proto Shield PCB, but they are useful in any shield because of their height. **Features**: - Receptacle Style: Square- Number of Ways/Pins: 10- Pin Spacing: 2.54 mm- Component Height: 23.5mm (Pl...

    View full details
    €1,75
  • Sold out
    €1,78

    What does “P” mean? “P” is for “panel mount” in this product. This Grove – Button is a sister version of original Grove - Button. They are identical except the Grove connecter is moved to the back so that you can easily use it as a neat and wire-free human interface device.

    €1,78
  • €5,52

    The X and Y axes are two ~10k potentiometers which control 2D movement by generating analog signals. The joystick also has a push button that could be used for special applications. When the module is in working mode, it will output two analog values, representing two directions. Compared to a no...

    View full details
    €5,52
x