Products

The ROBOTIS MINI can be programmed using RoboPlus Task (R+Task), a graphical, drag-and-drop programming tool based on C++. You can also create complex motions or choreography using RoboPlus Motion ...

The OKdo ROCK 3 Model C (ROCK 3C) is a dependable single board computer based on the powerful Rockchip RK3566 SoC in an ultra-small form factor. Despite its compact size, it’s packed with remarka...

Despite its compact size, OKdo ROCK 3 Model C is packed with remarkable features, including Quad core Armv8.2‑A Cortex®‑A55 CPU, Arm Mali™ G52 GPU, Wireless support including WiFi 5, HDMI 2.0 port ...

The ROCK 4C+ is a reliable, multifunctional and high-performing single-board computer based on a robust Rockchip RK3399T SoC, Dual Cortex® A72 CPU and Arm Mali™ T860MP4 GPU. Developed by OKdo Techn...

ROCK 4 SE is a class-leading single-board computer developed by OKdo in collaboration with Radxa. It’s a reliable, robust, low-power and high-performing SBC based on the powerful Rockchip RK3399-T ...

Reliable hardware - robust performance based on the Rockchip RK3588 SoC, Arm DynamIQ Quad Cortex - A76 @ 2.2/2.4GHz, Quad Cortex - A55 @ 1.8GHz CPU, Arm Mali - G610MC4 GPU and 8GB 64bit LPDDR4 RAM....

Adapts from the standard 20 pin 0.1" J-Link connector to the standard 10-pin 0.05" Cortex-M connector that is also used on many non-Cortex-M designs but with non-standard pinout. SEGGER J-Link deb...

Use our Arduino software library to get up and running in no time. The Segment Display Kit is the ideal way to get started with our technology. You will learn that the Ynvisible Segment Displays ar...

A set consisting of 10 blue 5 mm LEDs, 10 green, 10 red, 10 yellow, 10 white, 10 common anode RGB and 10 common anode bicolour (red-green) LEDs.

Extremely flexible, even after folded it always returns to its original shape. Dimensions 337 x 227 mm.

Extremely flexible, even after folded it always returns to its original shape. Dimensions 450 x 300 mm. Make your soldering and repair work easy with this multifunctional mat. ESD-Safe Heat-res...

The Arduino Nano 33 BLE Sense Protective Silicone Case is designed to perfectly fit your Arduino Nano 33 BLE Sense, and to protect it in case of adventurous experiments. Take full advantage of the...

A small photovoltaic panel, ideal for conducting experiments with solar energy.

This Solar lipo charger is designed for single Lithium battery (3.7V) for intelligent charging, with input reverse polarity protection. The maximum charging current is 500 milliamperes and the con...

It allows to provide the right degree of current to the batteries protecting them from an excess of discharge or charge in order to prolong their life cycle as much as possible. Attention! use onl...

FRobot Solar Power Manager series are designed for IoT projects and renewable energy projects, providing safe and high-efficiency embedded solar power management modules for makers and application ...

The DFRobot Solar Power Manager series are designed for IoT projects and renewable energy projects, providing safe and high-efficiency embedded solar power management modules for makers and applica...

Also ideal for adjusting the brightness of LED lights and strips.

Stereo Enclosed Speaker is a new passive speaker with JST PH2.0 interface. It is a perfect option for any DIY audio project which requires an 8 ohm impedance and 3W power. The suitable size and scr...

Transparent plastic box containing 50 heat shrinkable sleeves with a tin ring and two adhesive rings inside. Shrinkage ratio: 2:1 Working temperature: from -55°C to +105°C Complete tin melting...

It allows you to hold small objects and to have both hands free. The adjustable tweezers and the adjustable magnifying glass, available to you, allow you to carry out precision work with extreme co...

Do away with many components, using one companion. Compact and feature-packed. Out of the box, TIMI simulates many typical components used in most breadboard based projects. Save time (and money) ...

This nice package contains all you need for bring back to life your Braccio. A big servo Motor SR431 used on the based of the Braccio A servo motor SR311 used for the legs Lots of small parts, pla...

The TinkerKit Braccio is a fully operational robotic arm, controlled via Arduino. It can be assembled in several ways for multiple tasks such as moving objects. You can also attach a camera or so...