Skip to content
Expand your capabilities

Expand your capabilities

  • €7,34

    FRobot Solar Power Manager series are designed for IoT projects and renewable energy projects, providing safe and high-efficiency embedded solar power management modules for makers and application engineers. Solar Power Manager 5V is a small power and high-efficiency solar power management modul...

    View full details
    €7,34
  • Sold out
    €38,80

    The DFRobot Solar Power Manager series are designed for IoT projects and renewable energy projects, providing safe and high-efficiency embedded solar power management modules for makers and application engineers. Solar Power Manager is a complete small power and high-efficiency solar power manag...

    View full details
  • Sold out
    €51,10

    The Gravity: I2C Oxygen Sensor is based on electrochemical principles and it can measure the ambient O2 concentration accurately and conveniently. With high anti-interference ability, high stablility and high sensitivity, this arduino-compatible oxygen sensor can be widely applied to fields like ...

    View full details
  • Sold out
    €12,91

    This CCS811 Air Quality Sensor Breakout Board can measure the eCO2 (equivalent CO2) and TVOC (Total Volatile Organic Compounds) density. It can be widely used in many applications, such as air quality detection, air purifiers, ventilation system, and so on. This CCS811 air quality sensor uses AM...

    View full details
  • Sold out
    €6,97

    Breadboard 1 pin dual-male jumper wire 75pcs pack. The pack comes with 2 different lengths: 200mm (25pcs) and 100mm(50pcs). Perfect design and adequate quality for breadboard and Arduino connection, you can use it over and over again!

  • Sold out
    €202,80

    3Dsimo MultiPro is multifunctional tool that offers 4 basic functions: 3D drawing - using any current and future 3D printing filament (diameter of 1,75mm) Soldering - using soldering attachment you can solder as easily as with any other soldering iron. Changing the soldering tip is easy, ju...

    View full details
  • €37,15

    Use for any electronic, soldering, crafting, painting, replica, figurine and hobby work - or any precision project that requires extreme accuracy.                              Four all-metal flexible gooseneck helping hands are easily positioned where you want them. Eliminates the frustration o...

    View full details
    €37,15
  • €67,00

    Ultrasonic sensors emit ultrasonic pulses, and by measuring the time of ultrasonic pulse reaches the object and back to the transducer, the distance of sensor from the target object is calculated. They are widely used in detecting displacement, thickness, distance, water level, material level and...

    View full details
    €67,00
  • Sold out
    €4,00

    An infrared LED is like any other LED, with its color centered around 940nm. We can not only use the emitter to transmit data or commands, but also to emulate remotes to control your home appliance using an Arduino. The Infrared Emitter can transmit signals reliable up to 10 meters. Beyond 10 met...

    View full details
  • Sold out
    €7,71

    It can detect combustible Carbon Monoxide, Coal Gas and Liquefied Gas. The sensitivity can be adjusted by the potentiometer. Hardware Overview This is an Analog output sensor. It needs to be connected to any one Analog socket in Grove Base Shield. It is possible to connect the Grove module to A...

    View full details
  • Sold out
    €10,00

    It can widely measure pressure ranging from 300 mbar to 1200 mbar, with a super high accuracy of 0.01mbar(0.1m) in ultra-high resolution mode. The chip only accepts 1.8V to 3.6V input voltage. However, with the outer circuit on the pcb added, this module becomes compatible with 3.3V and 5V. There...

    View full details
  • €8,40

    Contrast to the ordinary relay, this latching relay does not need continuous power to keep the state, only a rising/falling pulse is needed to change the work state. The power can even be removed when the work state do not need to change, making the module especially suitable for low-power projec...

    View full details
    €8,40
  • Sold out
    €30,60

    The kit uses JGA25 DC geared motors and optical encoders for higher motor control accuracy and double-layer acrylic plates for easy placement of sensors and development boards. With this kit you can assemble your balance car, a mini Segway, or your personal project. Select the right sensor and d...

    View full details
  • €12,00

    4 wires intended for ground and 4 for signals. Color coded to match Saleae software (channels 4-7) Total length is 0,8 meter (31,5")

    €12,00
  • Sold out
    €23,70

    The Teensy is a complete USB-based microcontroller development system, in a very small footprint, capable of implementing many types of projects. All programming is done via the USB port. No special programmer is needed, only a standard micro USB cable and a PC or Macintosh with a USB port. New ...

    View full details
  • Sold out
    €14,00

    Teensy-LC (Low Cost) is a powerful 32 bit microcontroller board, with a rich set of hardware peripherals, at a very affordable price! Teensy-LC delivers an impressive collection of capabilities to make modern electronic projects simpler. It features an ARM Cortex-M0+ processor at 48 MHz, 62K Flas...

    View full details
  • €102,60

    DT71 has a unique ternary structure, which can be separated into controller, testing arms and tweezer tips, flexible to be replaced and combined. 360° rotatable with OLED screen, visible at all angles. Smart gesture recognition, automatically identify left/right hand operation and adjust screen d...

    View full details
    €102,60
  • €15,00

    It allows you to hold small objects and to have both hands free. The adjustable tweezers and the adjustable magnifying glass, available to you, allow you to carry out precision work with extreme comfort. It has on / off switch for the LED light.

    €15,00
  • €10,80

    Extremely flexible, even after folded it always returns to its original shape. Dimensions 337 x 227 mm.

    €10,80
  • €17,00

    Extremely flexible, even after folded it always returns to its original shape. Dimensions 450 x 300 mm. Make your soldering and repair work easy with this multifunctional mat. ESD-Safe Heat-resistant up to 500°C Pliable, returns to its original shape 3x Small storage boxes and 3x magnetic a...

    View full details
    €17,00
  • Sold out
    €5,00

    This Solar lipo charger is designed for single Lithium battery (3.7V) for intelligent charging, with input reverse polarity protection. The maximum charging current is 500 milliamperes and the connection is simple and convenient. Used with the solar battery and lithium battery, you can quickly b...

    View full details
  • €27,78

    Build up a simple environmental monitor station with this multi-function environment sensor! Based on the combination of CCS811+BME280 chip, this module features high accuracy, I2C interface, and fast Measurement. The BME280 can provide temperature and humidity compensation for CCS811 to improve...

    View full details
    €27,78
  • Sold out
    €13,10

    This is a non-contact water / liquid level sensor for Arduino. It utilizes advanced signal processing technology by using a powerful chip (XKC-Y25-T12V) with high-speed operation capacity to achieve non-contact liquid level detection. No contact with liquid makes the module suitable for hazardou...

    View full details
  • €1,58

    We've already released the Grove - I2C Hub (4 Port), now comes the 6 port version, the same size, two more connectors, almost half the price! As you may know, the 7 address length I2C bus allows up to 128 I2C devices to access. At present, there are over 80 Grove I2C modules in Seeed, however, no...

    View full details
    €1,58