Skip to content
Green & Sustainability

Green & Sustainability

  • €59,00

    The Nicla Sense ME is a tiny, low-power tool that sets a new standard for intelligent sensing solutions. With the simplicity of integration and scalability of the Arduino ecosystem, the board combines four state-of-the-art sensors from Bosch Sensortec: BHI260AP motion sensor system with integr...

    View full details
    €59,00
  • €29,90

    These sensors are of the latest generation and measure: Atmospheric pressure Temperature and humidity Light intensity (in LUX, max 650) To help you build projects and store the data collected locally, this shield has a slot for a microSD card (not provided). There is a ready to use librar...

    View full details
    €29,90
  • Sold out
    €48,50

    Gardens are a way to contribute to contrast the global warming. Maybe you don't have a backyard, but you have a balcony or a windowsill, in which you could put some plants! Of course you have to take care of them, and even if you don't have a green thumb, you can successfully grow plants thanks t...

    View full details
    €48,50
  • €16,90

    Do you have several components to connect to your project and would rather use connectors instead of soldering? The Arduino MKR CONNECTOR CARRIER provides Seeed Studio's Grove connectors to your MKR board. The MKR CONNECTOR CARRIER shield is an essential tool for rapidly prototyping activity. ...

    View full details
    €16,90
  • €169,00

    It can be positioned anywhere and is suitable for precision farming, smart agriculture, and other applications requiring intelligent control in remote locations. Power can be either supplied via solar panel or DC input. Remotely control your application through the Arduino Cloud (or third-party ...

    View full details
    €169,00
  • €4,86

    Grove - DPS310 is a high precision barometric pressure sensor, it can measure air pressure change caused by height changes in the centimeter level.

    €4,86
  • Sold out
    €10,92

    Provide reliable data for air purifier system Easy maintenance PWM output Grove compatible interface Compact and light design.

    €10,92
  • Sold out
    €74,94

    DFRobot released its latest wide range Arduino infrared CO2 sensor, which effective range is up to 0~50000ppm. This sensor is based on non-dispersive infrared (NDIR) technology and has good selectivity and oxygen-free dependency. It integrates temperature compensation and support UART communicati...

    View full details
    €74,94
  • €8,05

    The Nano I/O Sensor Shield is an expansion board for the Arduino Nano boards.There are several different options for power input. The form factor of the Nano I/O Shield board is the same as the Arduino UNO/arduino Leonardo. In addition, the sensor shield adopts Gravity interface that each pinout ...

    View full details
    €8,05
  • €58,86

    Gravity: Analog Electrical Conductivity Sensor / Meter For Arduino

    €58,86
  • €47,47

    Great and powerful sensor for everyone that wants to know the exact concentration of CO2(Carbon Dioxide) in the air.  This is the first CO2 sensor compatible with Arduino. The output voltage of the module falls as the concentration of the CO2 increases. The potentiometer onboard is designed to s...

    View full details
    €47,47
  • €16,76

    The DFRobot Solar Power Manager series are designed for IoT projects and renewable energy projects, providing safe and high-efficiency embedded solar power management modules for makers and application engineers. This medium-power high-efficiency solar power management module allows you to charge...

    View full details
    €16,76
  • €52,50

    Professional pH Sensor Meter Kit with industrial electrode. It has built-in simple, convenient, practical connection and long life (up to 1 year), which makes it very suitable for long term online monitoring. It has an LED which works as the Power Indicator, a BNC connector and PH2.0 sensor inter...

    View full details
    €52,50
  • €25,01

    Analog pH Sensor / Meter Kit specially designed for Arduino controllers and has convenient and practical "Gravity" connector and a bunch of features. Instant connection to your probe an your Arduino to get pH measurements at ± 0.1pH (25 ℃). For most hobbyist this great accuracy range and it's low...

    View full details
    €25,01
  • €5,00

    This soil Moisture sensor is made of a corrosion resistant material giving it a long service life. Insert it into soil and impress your friends with the real-time soil moisture data!The product includes an on-board voltage regulator which gives it an operating voltage range of 3.3 ~ 5.5V. It is c...

    View full details
    €5,00
  • €2,90

    The sensor traces have a weak pull-up resistor of 1 MΩ. The resistor will pull the sensor trace value high until a drop of water shorts the sensor trace to the grounded trace. Believe it or not this circuit will work with the digital I/O pins of your Arduino or you can use it with the analog pins...

    View full details
    €2,90
  • €2,72

    The resistance of a thermistor will increase when the ambient temperature decreases. It’s this characteristic that we use to calculate the ambient temperature. The detectable range of this sensor is -40 - 125ºC, and the accuracy is ±1.5ºC

    €2,72
  • €9,50

    The main gas detected is carbon monoxide, alcohol, acetone, paint thinner, formaldehyde and other slightly toxic gases. Features Low power consumption High sensitivity Tiny outline Responsive to a wide scope of target gases Cost efficient Durable Compatible with 5V and 3.3V

    €9,50
  • Sold out
    €9,26

    Grove-Temperature & Humidity Sensor Pro is a high accuracy temperature and humidity sensor based on the DHT22 module (also known as AM2302 or RHT03). High-cost performance and high precision make it ideal for temperature and humidity monitoring of Arduino and Raspberry Pi, you can also use it...

    View full details
    €9,26
  • Sold out
    €10,79

    This Dust Sensor gives a good indication of the air quality in an environment by measuring the dust concentration. The Particulate Matter level (PM level) in the air is measured by counting the Low Pulse Occupancy time (LPO time) in given time unit. LPO time is proportional to PM concentration. T...

    View full details
    €10,79
  • Sold out
    €11,13

    The sensor(chip) used in the module is designed with Sensirion’s CMOSens® technology. The chip is well calibrated, linearized and compensated for digital output.The typical accuracy of this module can be ±2%RH (for relative humidity) and ±0.3°C (for temperature). This module is compatible with 3....

    View full details
    €11,13
  • €10,69

    This is a multifunctional sensor that gives you temperature and relative humidity information at the same time. It utilizes a TH02 sensor that can meet measurement needs of general purposes. It provides reliable readings when environment humidity condition inbetween 0-80% RH, and temperature cond...

    View full details
    €10,69
  • €15,89

    This module can be used to measure temperature, atmospheric pressure and humidity accurately and fast. As the atmospheric pressure changes with altitude, it can also measure approximate altitude of a place. It can be connected to a microcontroller with I2C (integrated with Grove socket) or throug...

    View full details
    €15,89
  • Sold out
    €10,23

    This device is based on SI1145, a new sensor from SiLabs. The Si1145 is a low-power, reflectance-based, infrared proximity, UV index and ambient light sensor with I2C digital interface and programmable-event interrupt output. This device offers excellent performance under a wide dynamic range and...

    View full details
    €10,23
  • €4,90

    This sensor is very simple to use, you insert in into the soil and read the data. With this sensor in the right project, your plants can let you know when it's time to water them. Features Soil moisture sensor based on soil resistivity measurement Easy to use 2.0 cm X 6.0 cm grove module

    €4,90
  • €5,59

    There is a continuous-time switch on this Grove module. The output from the module switches from low (turns on) when a magnetic field (south polarity) is perpendicular to the Hall sensor and when it passes the operate point threshold BOP it switches to high (turns off) when the magnetic field dis...

    View full details
    €5,59
  • €64,90

    You can see the current oxygen concentration from reading the voltage values output proportional to the concentration of oxygen on the oxygen concentration linear characteristic graph. It’s suitable for detecting oxygen concentration in the environment. Grove - Gas Sensor(O2) is an organic reacti...

    View full details
    €64,90
  • €7,05

    It can detect combustible Carbon Monoxide, Coal Gas and Liquefied Gas. The sensitivity can be adjusted by the potentiometer. Hardware Overview This is an Analog output sensor. It needs to be connected to any one Analog socket in Grove Base Shield. It is possible to connect the Grove module to Ar...

    View full details
    €7,05
  • €8,33

    It can widely measure pressure ranging from 300 mbar to 1200 mbar, with a super high accuracy of 0.01mbar(0.1m) in ultra-high resolution mode. The chip only accepts 1.8V to 3.6V input voltage. However, with the outer circuit on the pcb added, this module becomes compatible with 3.3V and 5V. There...

    View full details
    €8,33
  • €8,34

    This is a non-contact water / liquid level sensor for Arduino. It utilizes advanced signal processing technology by using a powerful chip (XKC-Y25-T12V) with high-speed operation capacity to achieve non-contact liquid level detection. No contact with liquid makes the module suitable for hazardous...

    View full details
    €8,34
  • Sold out
    €41,26

    Gravity: I2C Ozone Sensor (0-10ppm) is based on electrochemical principles and it can measure the ambient O3 concentration accurately and conveniently. With high anti-interference ability, high stablility and high sensitivity, this arduino-compatible ozone sensor can be widely applied to fields l...

    View full details
    €41,26
  • Sold out
    €45,39

    The Gravity: I2C Oxygen Sensor is based on electrochemical principles and it can measure the ambient O2 concentration accurately and conveniently. With high anti-interference ability, high stablility and high sensitivity, this arduino-compatible oxygen sensor can be widely applied to fields like ...

    View full details
    €45,39
  • Sold out
    €6,65

    FRobot Solar Power Manager series are designed for IoT projects and renewable energy projects, providing safe and high-efficiency embedded solar power management modules for makers and application engineers. Solar Power Manager 5V is a small power and high-efficiency solar power management module...

    View full details
    €6,65
  • €25,18

    The DFRobot Solar Power Manager series are designed for IoT projects and renewable energy projects, providing safe and high-efficiency embedded solar power management modules for makers and application engineers. Solar Power Manager is a complete small power and high-efficiency solar power manag...

    View full details
    €25,18
  • €4,13

    This Solar lipo charger is designed for single Lithium battery (3.7V) for intelligent charging, with input reverse polarity protection. The maximum charging current is 500 milliamperes and the connection is simple and convenient. Used with the solar battery and lithium battery, you can quickly bu...

    View full details
    €4,13
  • €17,96

    Build up a simple environmental monitor station with this multi-function environment sensor! Based on the combination of CCS811+BME280 chip, this module features high accuracy, I2C interface, and fast Measurement. The BME280 can provide temperature and humidity compensation for CCS811 to improve ...

    View full details
    €17,96
  • Sold out
    €11,70

    This CCS811 Air Quality Sensor Breakout Board can measure the eCO2 (equivalent CO2) and TVOC (Total Volatile Organic Compounds) density. It can be widely used in many applications, such as air quality detection, air purifiers, ventilation system, and so on. This CCS811 air quality sensor uses AMS...

    View full details
    €11,70
  • Sold out
    €42,20

    Watermark sensor measures on a range 0 – 239 cbars, no maintenance, frost resistant. The Watermark sensor is a rustical tool, accessible, that doesn’t need maintenance. Simple to use, accurate, pertinent. “Simple to use” does not mean that taking irrigation monitoring decisions can be done withou...

    View full details
    €42,20
x