Skip to content
Motors&Servos

Motors&Servos

Quick and precise.
Complete control!

  • Sold out
    €13,90

    It is mainly used in mechanical motion control, Like CNC milling machine, laser cutter, 3D printer, it also can used in robot platform motion control! Specification:   •Phase: 2 •Step Angle: 1.8° •Voltage: 12/24 •Resistance: 11ohm •Rate Current: 0.45A/Phase •Phase Resistance: 7.5ohm/Phase...

    View full details
    €13,90
  • €18,06

    XL-320 has a high performance and precise control feature compared to its compact size. It supports TTL communication with a daisy chain feature to help easily build small robots. XL-320 has a high reliability and accuracy for position control along with PID control.

    €18,06
  • €9,50

    Grove - Servo is used in driving mechanism of robots. The module is a bonus product for Grove lovers. We regulated the three-wire servo into a Grove standard connector. You can plug and play it as a typical Grove module now, without jumper wires clutter.But if you feel more like a proto servo, ch...

    View full details
    €9,50
  • €6,12

    The Grove - I2C Motor Driver (TB6612FNG) can drive two DC motors up to 12V/1.2A or one stepper motor up to 12V/1.2A. With the on-board MCU, it easily works with Arduino via the Grove I2C interface. This diver board is based on TB6612FNG, which is a driver IC for DC motor and stepper motor with o...

    View full details
    €6,12
  • €12,90

    The Digital Continuous Rotation(360°)Servo Module is a high quality servo with the standard TinkerKit 3pin connector to be plugged in the Sensor Shield (remember that the Signal pin is ALWAYS the center pin). The best choice to add Robotics & Mechatronics to your project. Servos are composed ...

    View full details
    €12,90
  • €6,15

    Feetech Micro 360 Degree Continuous Rotation Servo v2: Dead band has been expanded from 10us to 90us Uses SMD potentiometer

    €6,15
  • €4,99

    Feetech Micro 1.8kg.cm Metal Gears Analog Servo

    €4,99
  • €4,62

    Feetech Micro 0.12sec/60degrees 1.3kg.cm Analog Servo. This is a great general-purpose actuator for tiny mechanisms. The FS90 is a 9 g analog servo that offers position control over an approximate 120° operating angle for servo pulses between 900 µs and 2100 µs. As with most servos, the pulse ra...

    View full details
    €4,62
  • €11,70

    Feetech 9kg Torque analog servo - Standard RC Metal Gear Servo Motor: A servo motor is a rotary or linear drive that allows precise control of angle or linear position, speed and acceleration.  It consists of a suitable motor coupled with a sensor for position feedback.  Servo motors are widely u...

    View full details
    €11,70
  • €8,50

    Feetech Continuous Rotation 360 degrees 6kg.cm

    €8,50
  • €13,00

    DYNAMIXEL Shield for Arduino MKR allows users to easily use ROBOTIS’ DYNAMIXEL Series along with Arduino MKR Boards.   The features are as follows: Compatible with Arduino MKR Compatible with ROBOTIS DYNAMIXEL TTL Series (Discontinued DYNAMIXEL may not be supported) For 12V DYNAMIXEL power ...

    View full details
    €13,00
  • Sold out
    €27,90

    It Includes: 6V DC motor(13000 rpm ±14%)  x2 Small stepper motor x1 Standard servo  x1(Speed: 0.17/60°@4.8V; 0.14/60°@6.0V)/(Torque: 3.5kg.cm@4.8V;  4.8kg.cm@6.0V) Micro servo  x1(Speed: 0.12/60°@4.8V; 0.10/60°@6.0V)/(Torque: 1.5kg.cm@4.8V;  1.8kg.cm@6.0V)

    €27,90
  • Sold out
    €95,20

      Autonomous cars are the future and we’ll show you how it works. This tiny wheeled robot has a camera and a microcomputer and can be programmed to autonomously navigate a small road while driving, just like an autonomous car would. It has built-in Bluetooth and Wi-Fi so you can connect it to...

    View full details
    €95,20
x