Bare Conductive Touch Board Pro Kit

Code: SKU-5303
Bare Conductive Touch Board Pro Kit
$165.00
prices are VAT excluded

Want to learn more?

Everything you need to prototype your project with the Touch Board and Electric Paint
  • Overview
  • Tech Specs
  • The Touch Board Pro Kit has all the tools and resources you need to prototype your Electric Paint and Touch Board Projects/ In this box you will find Printed Sensors, the exclusive Touch board Proto Shield, essential components and everything you need to take your interactive projects to the next level, whether you're a beginner to electronics or programming pro.

    This kit is recommended for 14+ years old makers.

    The Kit includes:

    • 1 Touch Board
    • 1 Electric Paint 10ml Tube
    • 1 Electric Paint 50ml Jar
    • 3 A5 Printed Sensors
    • 1 Touch Board Proto Shield
    • 1 Header Kit
    • 1 Resource Guide
    • 1 MicroSD Card*
    • 1 MicroSD Card Reader
    • 1 Micro USB Cable
    • 12 Crocodile Clips (Colours May Vary)
    • 1 15m Copper Tape

    * Touch Board will work with any microSD card up to 32 GB 

  • • Microcontroller Atmel ATmega32U4
    • Touch IC Resurgent Semiconductor MPR121
    • MP3 decoder IC VLSI Solution VS1053b
    • Audio output 15mW into 32Ω via 3.5mm stereo socket
    • Removable storage up to 32GB via micro SD card • Input voltage 3.0V DC – 5.5V DC
    • Operating voltage 5V DC
    • Max. output current (5V rail) 400mA (100mA at startup)
    • Max. output current (3.3V rail) 300mA
    • LiPo cell connector 2-way JST PH series - pin 1 +ve, pin 2 -ve
    • LiPo charge current 200mA
    • Capacitive touch electrodes 12 (of which 8 can be configured as digital I/O)
    • Digital I/O Pins 20 (of which 3 are used for the MPR121 and 5 are used for the VS1053b — the latter can be unlinked via solder blobs)
    • PWM channels 7 (shared with digital I/O pins)
    • Analogue input channels 12 (shared with digital I/O pins)
    • Flash memory 32 kB (ATmega32U4) of which 4kB used by bootloader
    • SRAM 2.5kB (ATmega32U4)
    • EEPROM 1kB (ATmega32U4)
    • Clock speed 16MHz (ATmega32U4), 12.288MHz (VS1053b)
    • DC current per I/O pin 40mA sink and source (ATmega32U4), 12mA source / 1.2mA sink (MPR121)
    • Analogue input resistance 100MΩ typical (ATmega32U4)